800-518-1230
Request a Quote »
Parking BOXX is a North American manufacturer of barrier gate systems for parking lots and garages throughout Minneapolis and the Twin Cities area. Straight arms up to 20 feet, articulating arms for low-clearance garages, breakaway safety design, and CloudEASE cloud management — all manufacturer-direct with no middleman. Serving Minneapolis facilities from Downtown Minneapolis to Northeast Minneapolis.
Parking BOXX barrier gates are available in two arm configurations — choose the right type for your Minneapolis facility.
Standard configuration for surface lots, garages, and commercial facilities. The most common barrier gate arm type installed in Minneapolis.
The arm folds upward during operation, requiring significantly less overhead clearance. Essential for Minneapolis parking garages where headroom is limited.
Barrier gates are available in regular (driver's side) or reverse (passenger side) configurations to match your lane layout.
Arm length is selected based on lane width. Standard lengths cover single-lane through double-wide applications.
Optional upgrades include LED-illuminated arms for 24/7 visibility, security cameras (single or dual with NVR), and battery backup for power-outage operation.
See Parking BOXX barrier gates installed and operating at real facilities across the Minneapolis metro area.
Every Parking BOXX barrier gate includes comprehensive safety features designed to protect vehicles, pedestrians, and the equipment itself.
The barrier arm automatically reverses direction if it contacts a vehicle or object during closure, preventing damage and injury.
Engineered break points with a shear pin that snaps on impact — protecting the motor, housing, and vehicle. Replacement shear pin costs under $10.
Illuminated panels indicate lane status — green when open, red when closed. Reduces driver confusion and prevents wrong-way entry.
An audible warning sounds before the arm descends, alerting pedestrians and drivers in the gate zone.
In-ground vehicle detection loops prevent the arm from closing on a vehicle and detect tailgating attempts.
Infrared beam sensors across the lane opening detect obstructions and hold the arm in the open position until the lane is clear.
| Arm Lengths | 8 ft, 10 ft, 12 ft, 18 ft, 20 ft (straight); up to 12 ft (folding) |
|---|---|
| Arm Material | Lightweight aluminum with 3M red retroreflective visibility strips |
| Housing | Stainless steel, rust-resistant — rated for extreme heat and cold |
| Motor | Direct drive motor with selectable open/close speed |
| Safety | Auto-reverse, breakaway arm, photo-eye, dual loop detectors, audible alarm |
| Breakaway Repair | Shear pin replacement — under $10 per incident |
| Power Backup | Optional battery backup for power outage operation |
| Manual Override | Manual release mechanism for emergency access |
| Software | CloudEASE cloud management software included at no additional cost |
| Optional Add-Ons | Security cameras (single or dual with NVR), LED illuminated arms, LPR integration |
Parking BOXX barrier gates are configured for the access control and revenue requirements of each facility type in the Minneapolis area.
ADA-compliant gates with emergency bypass and patient validation
Guest validation, valet integration, and revenue capture for Minneapolis hotels
Permit zones, monthly credentials, and LPR-based access for campuses
Revenue control for city-owned garages and surface lots in Minneapolis
Employee and tenant access control for Minneapolis office buildings
Merchant validation and shared parking for Minneapolis shopping centers
High-volume fast-cycle gates for airport and off-airport parking
Seasonal access management and gate control for RV parks
Parking BOXX offers manufacturer-direct pricing with no middleman markup for barrier gate installations in Minneapolis. Published pricing — no demo wall, no mandatory sales cycle.
Final pricing depends on arm length, number of lanes, additional equipment, and installation requirements. Request a quote for an exact price tailored to your Minneapolis facility. Minneapolis ranks among the coldest major U.S. cities, with winter temperatures regularly below -20°F and wind chills below -40°F that require Arctic-rated motor packages, insulated gate arm heaters, and cold-weather pay station electronics to maintain continuous uptime.
A single Parking BOXX barrier gate unit ranges from $2,000 to $6,000 depending on arm length and configuration. Complete gated systems with barrier gates, pay stations, and CloudEASE software start around $15,000. Full-featured systems with LPR cameras range from $40,000 to $150,000+. Parking BOXX offers manufacturer-direct pricing with no middleman markup for Minneapolis installations.
Parking BOXX offers two arm configurations for Minneapolis installations: straight arms (8 to 20 feet) for surface lots and standard garages, and articulating/folding arms for low-clearance garages that fold upward to save headroom. All arms feature lightweight aluminum construction with 3M retroreflective safety strips.
Yes. Parking BOXX provides complete barrier gate installation in Minneapolis and throughout the Twin Cities area. As the manufacturer, Parking BOXX handles the entire process — site survey, equipment manufacturing, concrete and electrical prep, hardware mounting, CloudEASE software configuration, and operator training.
Every Parking BOXX barrier gate includes auto-reverse on obstruction, breakaway arm design with shear pin (under $10 to replace), red/green illuminated guidance panels, audible closure alarms, dual loop detectors for tailgate prevention, and photo-eye infrared sensors. All safety features are standard — not add-ons.
Yes. Parking BOXX barrier gates integrate with LPR camera systems for ticketless entry, RFID card readers for credential-based access, and the CloudEASE cloud management platform. A single system can combine barrier gates with pay stations, LPR cameras, and access control readers — all managed from one dashboard.
When temperatures drop below -20°F in Minneapolis, standard parking gate motors can seize, pay station LCD displays go dark, and ticket printer inks fail — leaving facilities unable to process entries or exits. Parking BOXX cold-climate equipment packages include motor heater elements, low-temperature display modules, and insulated enclosures tested to -40°F. CloudEASE remote monitoring alerts facilities managers to any offline equipment before the morning rush, even when maintenance staff cannot safely access rooftop or open-air lanes overnight.